hints and tips « VennerCorp Tech Blog
Website Design, Custom Computer Software, Computer and Network Installation & Computer Consultancy - Covering Hampshire, Surrey, Berkshire, GU24, Guildford, Woking, Bracknell, Staines, Sunningdale, Virgina Water & Wokingham

Cookies and your Privacy

0800 978 8326

Request a Quote Today!

Tagged: hints and tips RSS

  • VennerCorp 18:22 on May 14, 2014 Permalink |
    Tags: , , hints and tips, , , , , Sun,   

    What are the Default Sun Admin Passwords

    Below are all the default usernames and passwords for Sun devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

     

    Make Model Version Type Username PASSWORD
    Sun Cobalt HTTP admin admin
    Sun JavaWebServer 1.x 2.x AdminSrv admin admin
    Sun ILOM of X4100 1 HTTP root changeme

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 19:38 on May 6, 2014 Permalink |
    Tags: , , hints and tips, , , , , , Xylan   

    What are the Default Xylan Admin Passwords?

    Below are all the default usernames and passwords for Xylan devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    What are the Default Xylan Admin Passwords?

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

    Make Model Version Type Username PASSWORD
    Xylan Omniswitch Telnet admin switch
    Xylan Omniswitch Telnet diag switch
    Xylan omniswitch Multi admin switch

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 19:07 on April 30, 2014 Permalink |
    Tags: , , hints and tips, ,   

    How to add Canadian holidays to my IPAD calender?

    Below is a simple guide to enable you to easily add future and past national holiday dates for Canadians
    to your Ipad.

    How to add Canadian holidays to my IPAD calender

    How to add Canadian holidays to my IPAD calender

    Apple provides a very useful feature on Ipads that allows you to subscribe to any Public Internet Calendar. They also makes things easy by providing their own Public Internet Calendars that you can use for FREE, yes FREE.

    Follow the steps below.

    • Unlock your Ipad as usual.
    • Tap your Ipad “Settings” Icon.
    • Tap “Mail, Contacts, Calendars”.
    • Scroll down find and tap “Add Account”.
    • Tap “Other”.
    • Tap “Add Subscribed Calendar”.
    • Locate the server field input box and enter the URL below for Canadian holidays or enter your own.

    Canadian  –  ical.mac.com/ical/Canadian32Holidays.ics

    • Tap “Next”.
    • If you want to you can customise the name of your entered calendar on the next screen under “description”
    •  When you are happy Tap “save”.

    You will now find you have every Canadian Holiday / Vacation loaded into the calender on your Ipad Calendar app. You will find they are viewable just like any other appointment.

     For more Tutorials and Hints & Tips check our Hints and Tips section.

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     

     
  • VennerCorp 12:59 on April 27, 2014 Permalink |
    Tags: , , hints and tips, , , , , , Unisys   

    Default Unisys Admin Passwords

    Below are all the default usernames and passwords for Unisys devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

     

    Make Model Type Username PASSWORD
    Unisys ClearPath MCP Multi NAU NAU
    Unisys ClearPath MCP Multi ADMINISTRATOR ADMINISTRATOR
    Unisys ClearPath MCP Multi HTTP HTTP

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 19:05 on April 25, 2014 Permalink |
    Tags: , , hints and tips, ,   

    How to add UK holidays to my Ipad calender

    Below is a simple guide to enable you to easily add the future and past national holiday dates for the UK easily and simply to your Ipad calender.

    Apple provides a useful feature in the latest versions of IOS that allows you to subscribe to any Public Internet Calendar. Apple also makes things even easier by providing its own Public Internet Calendars that you can use.

    How to add UK holidays to your Ipad calender

    How to add UK holidays to your Ipad calender

    Follow the simple steps below.

    • Unlock your Ipad.
    • Locate and Tap the “Settings” Icon.
    • Tap “Mail, Contacts, Calendars”.
    • Scroll down and tap “Add Account”.
    • Tap “Other”.
    • Tap “Add Subscribed Calendar”.
    • Locate the server field input box and enter the URL of you desired calendar

    For the UK enter – ical.mac.com/ical/UK32Holidays.ics

    • Tap “Next”.
    • If you want to you can change the name of the calendar on the next screen under “description”
    •  When you are happy Tap “save”.

     

    You now have every  upcoming and past UK holiday added to your Ipad Calendar. You will find they are are viewable just like any other appointment in your calendar.

    Follow the link below to get a list of all the currently available Public Internet Calendars that apple provides.

    http://www.apple.com/downloads/macosx/calendars/

     For more Tutorials and Hints & Tips check our Hints and Tips section.

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 21:16 on April 22, 2014 Permalink |
    Tags: Data Recovery, , , hints and tips, , , , , ,   

    Why Is My Hard Disk Not Spinning UP? 

    Why is My Hard Drive Is Not Spinning Up.

    If you’re hard drive does not do anything at all when you power it up – No noise or vibration, it is almost certainly a Circuit Board problem. Luckily of all the different problems that could befall your hard drive; with this issue there is a pretty good chance that your drive could be fixed.

    Why Is My Hard Disk Not Spinning UP?

    Image courtesy of WD

    There are normally 2 main causes for a hard drive to totally die, either a small diode (TVS) has blown up or some other component on the board has failed.

    1. Most circuit boards have two TVS diodes (one for the 5V and one for the 12V incoming power) to protect your drive in the case of a power surge. You can check to see if the TVS diode has gone by checking it with a meter, if it reads around 0 ohms (e.g. an open circuit), is discoloured and or smells it is likely to be the diode. So just remove it from the board and hopefully your drive will come back to life.
    2. If the diodes look ok and they read correct on your meter then something else on the board has gone poof and you will need to change to whole board. If your hard drive is old you can have a look on Ebay and buy a matching drive and swap the main circuit board, Unfortunately if it is a newer drive the circuit board will have a small IC (computer chip)  with a unique code embedded in it, without that code your drive will not work. So you can’t just find a replacement circuit board and swap it over.

    You will need to look on your current board and find the 8 way IC, this will need to be moved to your  replacement board, you can do this yourself or have a chat with your IT company and they should be able to do this for you.

     If your hard disk is a WD (Western Digital) you have a problem, their code is hidden within the main processor and this is very difficult for even a professional to remove.

    For more Tutorials and Hints & Tips check our Hints and Tips section.

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 15:45 on April 13, 2014 Permalink |
    Tags: , , hints and tips, , , , , , Xerox   

    All Default Xerox Admin Passwords

    Below are all the default usernames and passwords for Xerox devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

    Make Model Version Type Username PASSWORD
    Xerox 6204 Multi n/a 0
    Xerox 240a HTTP admin x-admin
    Xerox DocuCentre 425 HTTP admin 22222
    Xerox Document Centre 405 HTTP admin admin
    Xerox Document Centre 425 HTTP admin (none)
    Xerox Multi Function Equipment Multi admin 2222
    xerox work centre pro 35 HTTP admin 1111
    Xerox WorkCenter Pro 428 HTTP admin admin
    Xerox WorkCentre 7132 Multi 11111 x-admin
    xerox xerox Multi admin admin
    xerox xerox Multi n/a admin

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 18:32 on April 9, 2014 Permalink |
    Tags: Davox, , , hints and tips, , , , ,   

    All Default Davox Admin Passwords

    Below are all the default usernames and passwords for Davox devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

     

    Make Model Version Type Username PASSWORD
    Davox Unison Multi root davox
    Davox Unison Multi admin admin
    Davox Unison Multi davox davox
    Davox Unison Sybase sa (none)

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 11:07 on April 6, 2014 Permalink |
    Tags: APC, , , hints and tips, , , , ,   

    All Default APC Admin Passwords

    Below are all the default usernames and passwords for APC devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

     

    Make Model Version Type Username password
    APC 9606 Smart Slot Telnet n/a backdoor
    APC Smart UPS Multi apc apc
    APC Smartups 3000 HTTP apc apc
    APC UPSes (Web/SNMP Mgmt Card) HTTP device device
    APC USV Network Management Card SNMP n/a TENmanUFactOryPOWER

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     
  • VennerCorp 18:46 on April 2, 2014 Permalink |
    Tags: , , hints and tips, , , , , , Toshiba   

    All Default Toshiba Admin Passwords

    Below are all the default usernames and passwords for Toshiba devices; Often default passwords are needed either when you try to access a new device you have just purchased or if you have had to do a factory reset after a failed bios update or perhaps you have forgotten the user name and or password you created for your device.

    Default Admin Password

    Default Admin Password

    The problem is more often or not when you actually need to dig out the paperwork that came with the device you purchased 5 years ago you find it has gone walkie s. That is where the list below comes in it shows all the passwords and usernames for each model, even if your device is not mentioned as its a newer model or a new type of device by the manufacturer you should be able to see a pattern to guess the likely default password.

     

    Default Usernames and Passwords.

     

    Make Model Version Type Username PASSWORD
    Toshiba E-Studio 3511c HTTP Admin 123456
    Toshiba E-Studio 4511c HTTP admin 123456

    For more Tutorials and Hints & Tips  on passwords check our Security Section or our general Hints and Tips section

     

    If you would like help with your Device, Computer or Laptop then please contact us or visit our IT Support Page.

     

Tailored Technological Solutions

© Copyright 2000-2022 Venner Corp

Coverage Areas

We have customers all over the world, but our onsite work is centred on the south east of the UK, specifically - London, Berkshire, Surrey, Hampshire,Guildford, Camberley, Woking, Windsor, Ascot & Sunningdale.

[Custom Software] [Audio & Video] [Computer & Network Installation] [Web Site Design & Creation]
[Help & Support] [App Warehouse] [Online Shop] [Divisions] [Utilities] [Contact Us] [Accessibility] [Privacy] [Sitemap] [Links]

Hampshire ● Surrey ● Berkshire ● GU24 ● Guildford ● Woking ● Staines